Small shot blasting machine
Small shot blasting machine

Product review

Description

 Specification
Name
Quantity 
Technical parameters
Remarks
Each processing capacity
≤0.1m3 and ≤200kg
Requirements for workpieces
Single piece weight: ≤10Kg
L≤300mm t≥5mm ∮≤200mm 
Temperature: ≤80°C
Cleaning room
1
1330B×1010L×1653Hmm(max)
Shot blasting machine
1
Model: Q360 type
Shot blasting amount:130kg/min
Impeller speed: 2500rpm
Projection speed: 61m / s
Transmission: belt drive
Motor power: 7.5kw
hoist
1
 Model: TS-10
Lifting capacity: 10t/h
Reducer model: XWD1.5-3-1/35
Power: 1.5kw
Separator
1
Model: FL-10
Wind speed: 4-5m/min 
Full curtain wind selection
Separation effect: >99%
for the pill gate
1
cylinder control
Screw conveyor
1
Delivery capacity: 10t/h
Reducer with hoist
Track carrying system
1
Track size: 1140B × 3475L × 20H
End plate diameter: ∮650mm spacing: 900mm
End plate speed: 3.5rpm 
Leakage hole: ∮6 with rubber rib
Reducer model: XWD1.1-3-1/35
Reducer power: 1.1kw
Dust Collector
1
Model: FBD24
Filtration area: 16.8m2
Ventilation capacity: 1500m3/h
mechanical vibrating bag
Fan model: 4-72NO.3.2A
Fan power: 2.2KW
Rapping motor power: 0.55KW
 Total power of equipment 
~12.85KW
Working voltage: 380V/50Hz
Operating voltage: 220V/50Hz
The amount of the initial loading of the pellets
400kg
The buyer must order separately, not included at random
Compressed air
Source pressure: 0.4~0.6MPa
Consumption: 0.02 m3/min
Dust emission concentration
lower than the 120mg/m3 specified in GB16297-1996 "Integrated Emission Standards for Air Pollutants"
 Noise 
lower than the 93dB(A) specified in JB5360-91 Track Shot Blasting Machine Technical Conditions